Audiopipe APCLE-10001D 1000 Watt Class D Mono Amplifier

Description

Unit includes: 1-Channel power amplifier, Mounting hardware, Wired bass controller, 80 amp fuse and fuse holder and Instruction manual

Audiopipe APCLE-10001D 1000 Watt Class D Mono Amplifier

Features:

1000 Watts Max Power
Pulse Width Modulated MOSFET Power supply
Double side FR-4 PCB with high quality SMD components
Oversized toroids for excellent current and voltage control
3-Way Protection circuit senses internal temperature and automatically lowers input level to prevent heat damage. Short circuit protection prevent damage when speaker leads are shorted. Overload protection prevent damage from low impedance or blown woofers.
1-ohm stable
Amplifier is strap-able so that you can connect and bridge with another for additional power output (2 ohm - 4 ohm load only)
Variable Low Pass filters allow you to adjust the playback frequencies from 40Hz to 180Hz at 12dB per octave
2 channel RCA inputs accepts up to 5 volt input signals
0° and 180° phase control
Variable Bass boost controls: 0 - +12dB at 30Hz - 80Hz
Variable subsonic filter: 24dB 10Hz - 15Hz
Gold plated terminals for all connections
Accepts up to 16 volts DC input for maximum sound output
Frequency Response: 8Hz to 180 Hz
Total Harmonic Distortion (4 Ω): < 0.15% (1kHz)
Signal-to-Noise Ratio (IHF-A Weighted, at 1 kHz): >70dB
Dimensions: 11-3/8" (W) x 2-1/8" (H) x 7" (D)
Minimum 4 Gauge power wire with 80 amp fuse

RMS Power Rating:

4 ohms: 400 watts x 1 channels
2 ohms: 600 watts x 1 channels
1 ohms: 1000 watts x 1 channel

Specifications

More Information
Manufacturer	Audiopipe
Part Number	APCLE10001D
Amplifier Topology Class	Class D
Number of Channels	1 Channel
Total RMS Power at 1 ohm	$1,000.00
Total RMS Power at 2 ohm	$600.00
Total RMS Power at 4 ohm	$400.00
Total Peak Power Output	$1,000.00
Amplifier Bridging	Not Bridgable
Minimum Impedance in Un-Bridged Mode	1 ohm
Strappable Amplifier	No
Strappable Power Output	2000 Watts
RCA Pre-amp Audio inputs	1 Pair
RCA Pre-amp Audio outputs	1 Pair
Preamp voltage	5 volts
Speaker level inputs	No
Gain Control	Yes
Bass Knob / Remote Gain	Yes
Built in Crossover	Low-pass, Sub-sonic
Cooling Fan	No
Color	Black
Warranty	1 Year
Recommended Power Wire Gauge	4 Gauge
CEA2006 Compliant	No
UPC Code	784644417423
Return period	30 days
Exchange period	30 days

Reviews

Product Q&A

Customer Questions

Have a question? Go ahead and ask anything. We are here to help. Please login to ask a product question.

Your question:

Your name:

get notification on email when the answer is ready

Your e-mail:

Installation Videos

Car amplifier installation

We show you the complete process of installing a Pioneer Double DIN car stereo in a Chevy truck. The in-depth video shows the installation of the interface, and steering wheel control.

Amplifier Installation basics

Let's start with the basics of adding or installing a car amplifier. First you will need to plan your installation and power wiring, this usually is the most difficult part of the installation for most.

How to choose the proper wire size explained

What size power wire do I need for my amplifier? Well, that depends on the length of the wire and the power consumption of the amplifier. We walk you through how to choose the right gauge wire and wire material depending on your amplifier installation requirements.

How to wire speakers and subwoofers to your new amplifier

In our third video we demonstrate the various ways you can wire speakers and amplifiers to all types of amplifiers. There different ways to do this depending on the type of amplifier you choose to purchase.

What is gain? How do I set it properly?

In our fourth video we demonstrate how to set the gains on your amplifier to prevent damage to your speakers, subwoofers and even possibly your new amplifier. Using a portable oscilloscope we show you how to set your gains.