We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Power Acoustik Caliber Series CB4-1200 4 Channel Class AB Amplifier - 1,200 Watts
- 4-Channel Class AB Amplifier
- Designed as a dedicated full range audio amplifier
- 2 Ohm stable in stereo and 4 ohm stable in mono
- 4-Ohms Dual Bridged: 300 watts x 2 channel
- 2-Ohms Stereo: 150 watts x 4 channel
- 4-Ohms Stereo: 120 watts x 4 channel
- 4-RCA level inputs
Power Acoustik CB4-1200 4 Channel Class AB Amplifier - 1,200 Watts
- Features:
- 4-Channel Class AB Amplifier
- Pulse Width Modulated MOSFET power supply
- 2 ohms stable in stereo and 4 ohm stable in mono for high power output
- 3-way protection circuitry (Thermal, Overload, and Speaker short protection)
- High Speaker Level and Low Level RCA Input
- Variable input gain control with low level input voltage up to 6 Volts
- Nickel plated low level RCA inputs
- Nickel plated low level RCA outputs
- Variable low-pass crossover: 50 - 400Hz, 12 dB/octave
- Variable high-pass crossover: 50 - 400Hz, 12 dB/octave
- Variable bass boost: 0dB / +6dB / +12dB
- Gain Control
- Color: Satin Silver Chassis
- Inputs and Outputs:
- 4 - Nickel-plated RCA low level inputs (250 mV - 6 V)
- Input sensitivity is 250 mV to 6V
- 8 AWG to 18 AWG speaker connections
- 4 AWG to 8 AWG power connections (4 Gauge Recommended)
- RMS Power Output:
- 4-Ohms Dual Bridged: 300 watts x 2 channel
- 2-Ohms Stereo: 150 watts x 4 channel
- 4-Ohms Stereo: 120 watts x 4 channel
- Built in Crossover:
- Variable high-pass filter: 120 - 3,000 Hz, 12 dB/octave
- Variable low-pass filter: 50 - 1,500 Hz, 12 dB/octave
- Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
- Dimensions:
- Overall Dimensions: 9.5"W x 13"L x 2"H
Manufacturer | Power Acoustik |
---|---|
Part Number | CB4-1200 |
Amplifier Topology Class | Class AB |
Number of Channels | 4 Channel |
RMS Output per Channel (x2 at 4 ohms) | $120.00 |
RMS Output per Channel (x4 at 4 ohms) | $150.00 |
Amplifier Bridging | Bridgable @ 4 ohms |
Minimum Impedance in Bridged Mode | 8 ohm |
Strappable Amplifier | No |
RCA Pre-amp Audio inputs | 2 Pairs (Front, Rear) |
Speaker level inputs | Yes |
Built in Crossover | High-pass, Low-pass |
Cooling Fan | No |
Color | Black |
Warranty | 1 Year |
Recommended Power Wire Gauge | 4 Gauge |
CEA2006 Compliant | No |
UPC Code | 709483054196 |
Return period | 30 days |
Exchange period | 30 days |
Car amplifier installation
We show you the complete process of installing a Pioneer Double DIN car stereo in a Chevy truck. The in-depth video shows the installation of the interface, and steering wheel control.
Amplifier Installation basics
Let's start with the basics of adding or installing a car amplifier. First you will need to plan your installation and power wiring, this usually is the most difficult part of the installation for most.
How to choose the proper wire size explained
What size power wire do I need for my amplifier? Well, that depends on the length of the wire and the power consumption of the amplifier. We walk you through how to choose the right gauge wire and wire material depending on your amplifier installation requirements.
How to wire speakers and subwoofers to your new amplifier
In our third video we demonstrate the various ways you can wire speakers and amplifiers to all types of amplifiers. There different ways to do this depending on the type of amplifier you choose to purchase.
What is gain? How do I set it properly?
In our fourth video we demonstrate how to set the gains on your amplifier to prevent damage to your speakers, subwoofers and even possibly your new amplifier. Using a portable oscilloscope we show you how to set your gains.