Rockford Fosgate P1-2X12 Dual P1 12" Loaded Subwoofer Enclosure for Car

The P1 series subwoofers are the Rockford Fosgate's entry level subwoofer systems. These subwoofers utilize some of the features from the king of the hill P3 series subwoofers. The Rockford Fosgate P1 pre-loaded subwoofers are priced at a bargain and bring big bass to your vehicle with power handling capability up to 1000 watts! The P1-2X12 is a dual 12 inch subwoofer pre-loaded enclosure that was developed using Rockford Fosgate's computer aided design software. The 5/8 inch MDF enclosure is optimized and provides the deepest bass extension and has incredible output. The Rockford Fosgate P1-2X12 subwoofer utilizes a high-flow, low-noise ported enclosure for added output and more efficient. To add even more bass, the Rockford Fosgate P1 subwoofer system also utilize V.A.S.T. technology, this technology increases cone area by 25% giving you even more volume when compared to an equivalent size woofer.

The dual 12 inch subwoofer enclosure creates bass that has to be heard to be believed. Now you can buy a pre-built subwoofer system that is guaranteed to leave you awestruck and all you have to do is connect the speaker wires. Rockford Fosgate has done the work for you with the P1-2X12 subwoofer system.

Subwoofer Features:

• Dual 12" P1S4-12 subwoofer in MDF enclosure
• Single two ohm coils wired internally to 2 ohm impedance
• Kevlar reinforced paper cone
• High temperature 2" voice coil with spun laced nomex insulating reinforcement collar
• 16 gauge compound bend frame StampCast basket with integrated spider venting
• V.A.S.T. - Vertical attach surround technique increases a speaker's effective radiating cone area
• Optimized motor with extended pole piece and bumped vented backplate
• Tear and fatigue linear spider with embedded 16 AWG tinsel leads
• Multi point high temp/strength neck joint bonding technique
• Semi-Flexible PVC removable protective motor cover
• Custom insulated compression input terminal assembly
• Proprietary spider venting/cooling technique
• Decorative ABS plastic trim ring
• Custom 10-AWG nickel plated push terminals
• Frequency response: 20-250 Hz
• Sensitivity: 86 dB

Vented Enclosure features:
• Constructed with 5/8" MDF
• Proprietary high-flow, low-noise port
• High current binding posts
• Covered in High Density Carpet
• Wired with Rockford speaker cabling

Power Handling Max:
• Maximum Power: 1000 Watts

Power Handling RMS:
• 500 Watts nominal continuous power handling RMS

Quick Specs:
• Nominal Impedance: 2 - Ohm

Dimensions:
• 15.125" x 33.875" x 15.75"
• (38.4cm x 86.0cm x 40.0cm)